M45x AWD V8-4.5L (VK45DE) (2008)
FUNCTIONS OF COMPONENT PARTS
NOTE:
-
Garter spring cannot be removed from cage of male-side piping.
-
Indicator ring remains near piping connection point, however, this is not a malfunction. (This is to check piping connection during factory
assembly.)
REMOVAL
1. Clean piping connection point, and set a disconnector.
2. Slide disconnector in axial direction of piping, and stretch garter spring with tapered point of disconnector.
3. Slide disconnector farther so that inside diameter of garter spring becomes larger than outside diameter of female-side piping flare. Then male-side
piping can be disconnected.
INSTALLATION