M45x AWD V8-4.5L (VK45DE) (2008)
Power Distribution Module: Service and Repair
Removal and Installation of IPDM E/R
Removal and Installation of IPDM E/R
REMOVAL
1. Remove cowl top cover (RH).
2. Disengage pawls (A) on both side of IPDM E/R cover B (1), remove IPDM E/R cover A (2).
3. While pushing pawl (A) on backside of IPDM E/R cover B (1) toward vehicle front to unlock, lift up IPDM E/R (2).
4. Disengage pawls on both side of IPDM E/R (1), remove IPDM E/ R cover B.
5. Remove harness connector from IPDM E/R (1) and remove IPDM E/R (1).
INSTALLATION
Installation is the reverse order of removal.