M45x AWD V8-4.5L (VK45DE) (2008)
3. Remove the screws then remove the steering switch.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Fix the air bag module harness (shown as A in the figure) to the harness fixing hook (shown as B in the figure).
-
Be careful not to damage the harness while installing.
-
Tighten the special bolts after exactly adjusting the centers of fixing holes on the air bag module side and the steering wheel side. If the
holes are misaligned, the bolt threads are damaged and the module is not installed securely.
-
In case that malfunction is detected by the air bag warning lamp, reset by the self-diagnosis function and delete the memory by
CONSULT-III.
-
In case that malfunction is still detected after the above operation, perform self-diagnosis to repair malfunctions.
-
After the work is completed, check that no system malfunction is detected by air bag warning lamp. Refer to SRS-22, "SRS Operation
Check (USER MODE)". See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures