M45x AWD V8-4.5L (VK45DE) (2008)
Seat Belt Retractor: Service and Repair
Rear
REMOVAL OF SEAT BELT RETRACTOR
1. Remove the outer and inner anchors.
-
Remove the rear seat cushion.
-
Remove the outer anchor fixing anchor bolt and the anchor bolt tightening the inner anchor together with the seat belt buckle.
2. Remove the seat belt assembly.
-
Remove the rear seatback
-
Remove the rear kicking plate, the rear wheelhouse garnish and the rear pillar finisher.
-
Remove the seat belt finisher from the rear parcel shelf finisher.
-
Remove the rear parcel shelf finisher.
-
Remove the fixing anchor bolt of the seat belt retractor.
INSTALLATION OF SEAT BELT RETRACTOR
-
Install in the reverse order of removal.
-
Tighten by specified torque.
Tightening torque : 49.0 N.m (5.0 kg-m, 36 ft-lb)