M45x AWD V8-4.5L (VK45DE) (2008)
Headlamp Alignment Sensor: Service and Repair
Removal and Installation of Height Sensor
REMOVAL
1. Disconnect height sensor connector.
2. Remove height sensor link bracket mounting nut. (rear stabilizer side)
CAUTION: Never remove from the installation nut of height sensor link bracket (height sensor link side).
3. Remove bolts, and remove height sensor.
LT-161 Exploded View
INSTALLATION
Installation is the reverse order of removal.
CAUTION: Tighten the bracket while pushing onto rear stabilizer when installing the installation nut of height sensor link bracket (stabilizer
side).