M45x AWD V8-4.5L (VK45DE) (2008)
8. Remove front oil seal using the puller.
Tool number A: KV381054S0 (J-34286)
CAUTION: Be careful not to damage gear carrier.
INSTALLATION
1. Apply multi-purpose grease to front oil seal lips.
2. Using the drifts, install front oil seal as shown in figure.
Tool number
A: ST33400001 (J-26082)
B: KV38102510 ( - )
CAUTION:
^
Never reuse oil seal.
^
When installing, never incline oil seal.
3. Align the matching mark (B) of drive pinion with the matching mark (A) of companion flange, and then install the companion flange (1).