M45x AWD V8-4.5L (VK45DE) (2008)
Windshield Washer Pump: Service and Repair
Removal and Installation of Washer Pump
REMOVAL
1. Remove fender protector (front) RH.
2. Disconnect washer pump connector (1) and remove washer tube.
3. Pull out washer pump (2) in direction shown by the arrow in the figure. Remove washer pump (2) from washer tank.
INSTALLATION
Note the following, and installation is the reverse order of removal.
CAUTION: When installing washer pump, there should be no packing twists, etc.