Q45 V8-4.5L (VK45DE) (2002)
Sunroof / Moonroof Module: Service and Repair
SUNROOF UNIT
Removal
CAUTION:
-
Always work with a helper.
-
When taking sunroof unit out, use shop clothes to protect the seats and trim from damage.
-
After installing the sunroof unit and glass lid, be sure to carry out the leak test and check that there is no malfunction.
1. Remove the headlining. Refer to "Removal and Installation"
2. Disconnect drain hoses (4).
3. Remove glass lid.
4. Remove screws, and remove the sunroof switch bracket.
5. Remove motor mounting screws. Remove sunroof motor and disconnect harness connector.
CAUTION:
-
Before removing sunroof motor, make sure that sunroof is fully closed.
-
After removing sunroof motor, never attempt to rotate sunroof motor as a single unit.
6. Remove nuts on the front end and side rail.