Q45 V8-4.5L (VK45DE) (2002)
Wheel Speed Sensor: Service and Repair
Wheel Sensor
REMOVAL
Be careful of the following.
CAUTION: When removing the sensor, do not rotate it, if possible, and also do not forcibly pull the sensor harness.
INSTALLATION
Be careful of the following. Tighten the mounting bolts and nuts to the specified torque.
^
When installing, check that there is no foreign material such as iron chips on the pick-up and mounting hole of the sensor, and check that no
foreign material has been caught in the sensor rotor motor. Remove any foreign material to clean the mount.