Q45 V8-4.5L (VK45DE) (2002)
Crankshaft: Specifications
Crankshaft - Out of Round and Taper
OUT-OF-ROUND AND TAPER OF CRANKSHAFT
Out-of-roundness is indicated by the difference in dimension between X and Y at A and B.
Taper is indicated by the difference in dimension between A and B at X and Y
LIMIT
Out-of-round (X-Y):................0.015 mm (0.0006 inch)
Taper (A - B):................0.010 mm (0.0004 inch)