Q45 V8-4.5L (VK45DE) (2002)
COMPONENT KEY FOR TIMING CHAIN
CAUTION: Apply new engine oil to parts marked in illustration before installation.
INSTALLATION
NOTE: The figure shows the relationship between the mating mark on each timing chain and that on the corresponding sprocket, with the components
installed.
Parts with an identification mark (R or L) should be installed on the corresponding bank according to the mark.
TIMING CHAIN ALIGNMENT MARKS
Parts with an identification mark:
-
Intake camshaft sprocket
-
Knock pin groove of exhaust camshaft sprocket (camshaft sprocket is same part both banks)
-
Chain tension guide
-
Chain slack guide
Because of parallel manufacture, there are two types of mark (link colors) for timing chain.