Q45 V8-4.5L (VK45DE) (2002)
8. By referring to the figure, measure valve clearances at locations marked X as shown in the table (locations indicated with white arrow in figure)
No.3 cylinder compression TDC
9. Turn crankshaft pulley clockwise by 90° from the position of No. 3 cylinder compression TDC (clockwise by 360° from the position of No. 1
cylinder compression TDC) to measure intake and exhaust valve clearances of No. 6 cylinder and exhaust valve clearance of No. 2 cylinder.
10. If out of specifications, adjust.
See: Adjustments/Adjustment Procedures