Q45 V8-4.5L (VK45DE) (2002)
Part Number: .............. KLH00-PAGS0
*
O-ring must be closely attached to dented portion of tube.
*
When replacing the O-ring, be careful not to damage O-ring and tube.
*
Connect tube until you hear it click, then tighten the nut or bolt by hand until snug. Make sure that the O-ring is installed to tube
correctly.
*
After connecting line, conduct leak test and make sure that there is no leakage from connections. When the gas leaking point is found,
disconnect that line and replace the O-ring. Then tighten connections of seal seat to the specified torque.