Q45 V8-4.5L (VK45DE) (2002)
A.
While pressing on the CONSULT-II screen with your thumb, quickly depress and release the ON/OFF switch (see Figure 11).
NOTE:
A double-beep will sound after the ON/OFF switch is quickly depressed and released Release your thumb from the screen after a double-beep sound
is heard.
B.
Select "Transfer files via Lan" (see Figure 12). Set the CONSULT-II unit down for now.
NOTE:
If you accidentally choose a menu option other than "Transfer Files via Lan", turn CONSULT-II off and restart it according to step 8A above.
9.
On ASIST, make sure the Ethernet (IP) Address (for CONSULT-II) displayed in the "Change IP Address" box is the same number you printed in
step 4H, then select "Continue".
NOTE:
If the Ethernet (IP) Address (for CONSULT-II) displayed in the "Change IP Address" box is not correct, turn CONSULT-II off and return to step 4
in this bulletin.
10.
Data transfer will take about 1 minute and the progress of the transfer is displayed on the ASIST PC screen (see Figure 13). Wait until the data
transfer is complete (see CAUTION, below).