Q45 V8-4.5L (VK45DE) (2002)
/Page-1546024.png)
B.
Using the digit keys on the keypad (see Figure 9), enter the correct ECM ID Code from Chart A in the Bulletin.
C.
Then click the "Continue" button on the keypad.
D.
From the ECM Data Reprogramming screen (see Figure 10), write down the "To" part number (like 23710-*****) on your screen that
applies to your vehicle.
E.
Click the "Continue" button on the ECM Data Reprogramming screen (see Figure 10) to proceed to CONSULT-II setup.
8.
Turn on CONSULT-II as follows to access the file transfer mode:
