Q45 V8-4.5L (VK45DE) (2002)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
AIR CLEANER & AIR DUCT
REMOVAL / Air Cleaner and Air Duct
1. Remove engine cover and air cleaner cover.
2. Remove harness connector from mass air flow sensor.
3. Remove air duct (inlet), air cleaner case/mass air flow sensor assembly and air duct/resonator assembly disconnecting their joints.
-
Add marks as necessary for easier installation.
4. Remove mass air flow sensor from air cleaner case.
CAUTION: Handle mass air flow sensor with following cares.
-
Do not shock it.
-
Do not disassembly it.
-
Do not touch its sensor.
5. Remove resonator in fender lifting left fender protector.
INSTALLATION
1. Align marks. Attach each joint. Screw clamps firmly.
2. Install in the reverse order of removal.
CHANGING AIR CLEANER ELEMENT
1. Remove air cleaner cover.
2. Remove two clips and lift up air cleaner element along with holder.
3. Remove air cleaner element from holder.