Q45 V8-4.5L (VK45DE) (2002)
NOTE:
ALL Reprogramming operations are done with the DLC-II cable ONLY.
28.
Confirm that all electrical loads (except for the ignition) such as headlights, defroster, A/C, Audio (radio), cellular telephone (if applicable) are
"OFF".
CAUTION:
Do not unplug CONSULT-II from the vehicle while Reprogramming ECM. Do not attempt ECM Reprogramming with any vehicle electrical loads
"ON" except for the ignition. Permanent ECM damage can occur.
29.
Roll down the driver's window part way, exit the vehicle, close the door and hang the CONSULT-II unit on the outside of the window (see Figure
19).
CAUTION:
Do not open the vehicle doors, trunk, or hood during the reprogramming.
30.
Press "INITIATE ECM REPROGRAM" (see Figure 20), then do the following:
^
Press "ECM"
^
Review the precaution
^
Press "NEXT"