infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

All Technical Service Bulletins for PROM - Programmable Read Only Memory:|01-070 > < A/T - Manual Mode Inoperative/DTC P1815 Set|Page 10754
Page 15
background image

^

YES

^

BACK (2x)

^

VDC

^

SELF DIAG RESULTS

66.

Check the status of any stored VDC DTC code(s):

A.

If no DTC(s) is stored or one or more of the following code(s) is stored, proceed with step 67.

^

P0120, P0505, P0605, P1123, P1212, U1000, or VDC 12

B.

If a DTC(s) other than the codes listed above is stored:

^

Print out the stored DTC(s)

^

Print out the freeze frame data

Proceed with diagnosis according to the applicable Service Manual

67.

Press:

^

Erase

^

Yes

68.

Turn the ignition key to the OFF position, and disconnect CONSULT-II.

69.

Road test the vehicle with 1/8 throttle application (under 2000 RPM) and confirm the transmission properly up-shifts from 1st to 2nd, to 3rd, 3rd
to 4th, and 4th to 5th

^

If shifting does not properly occur, perform further diagnosis using CONSULT-II.

All Technical Service Bulletins for PROM - Programmable Read Only Memory:|01-070 > < A/T - Manual Mode Inoperative/DTC P1815 Set|Page 10754