Q45 V8-4.5L (VK45DE) (2002)
Air Bag: Service and Repair
Removal and Installation
Driver Air Bag Module
REMOVAL
CAUTION:
-
Before servicing SRS, turn the ignition switch off, disconnect battery ground cable and wait at least 3 minutes.
-
Always work from the side of driver air bag module.
1. Remove the side lids. Using Tamper resistant torx socket (T30), remove the special bolts at right and left.
2. Remove the lower lid.
3. Disconnect the air bag harness connector, and remove the air bag module.