Q45 V8-4.5L (VK45DE) (2002)
7.
Pull the Driver Door Molding UP past the top of the B Pillar Lower Trim Panel (see Figure 3).
8.
Use a Plastic Pry Tool (from essential tool set # J-46534) to remove the B Pillar Rear Vent Grill (see Figure 4).
9.
Use a Plastic Pry Tool (from essential tool set # J-46534) to release the front end of the Driver-side Rear Door Sill Plate (see Figure 5).
^
This will allow clearance for removing the Door Molding (next step).