Q45 V8-4.5L (VK45DE) (2002)
5. Install the cartridge on top of the side plate (front) with smaller slot in the cartridge facing the casing.
6. Install pulley to the casing.
CAUTION: When installing pulley, be careful not to scratch the drive shaft seal.
7. Install rotor to the pulley shaft with punch mark on the rotor facing the casing.
8. Install vane to the rotor with arc of the vane in contact with the cartridge.
9. Using a hammer and a 10-mm box, install rotor snap ring to the slot in the pulley shaft.
CAUTION: