Q45 V8-4.5L (VK45DE) (2002)
40.
Select the correct TCM program to install from the choices on the CONSULT-II screen (see Figure 10).
41.
The "REPROGRAM START" window should appear (see Figure 11).
NOTE:
Refer to the ECU Reprogramming Software Operations Manual for instructions on error messages.
42.
Press "START". After a moment the window shown in Figure 12 will appear. CONSULT-II will now turn off its screen backlight and reprogram
the TCM.
NOTE:
This process will take about 10 minutes.