Q45 V8-4.5L (VK45DE) (2002)
Windshield Washer Reservoir: Service and Repair
Removal and Installation for Washer Tank
1. Pull out washer tank inlet.
2. Remove fender protector, refer to "FENDER PROTECTOR".
3. Remove washer pump connector.
4. Remove washer tank installation screw and pawl.
5. Remove washer hose, and remove the washer tank from the vehicle.
CAUTION: After installation, add water up to the upper level of the washer tank inlet, and check for water leaks.
Washer tank installation screw
Tightening torque: 3.9 - 5.0 N.m (0.39 - 0.52 kg-m)