Q45 V8-4494cc 4.5L DOHC (VH45) (1992)
/Page-996002.png)
7. Disconnect brake tube (4 portions) from TCS actuator.
8. Remove mounting nuts as shown.
9. Take away TCS actuator with bracket.
INSTALLATION
CAUTION:
-
Refill with new brake fluid "DOT 3".
-
Use new brake fluid "DOT 3" for TCS operating oil.
-
Bleed air from brake fluid line and TCS operating oil circuit.
Installation procedures are in reverse order of removal. Tightening torque for M 8 nut: 8 - 11 N.m (0.8 - 1.1 kg-m, 5.8 - 8.0 if-lb)
