Q45 V8-4494cc 4.5L DOHC (VH45) (1992)
Wheel Bearing: Service and Repair
Front
Fig. 3 Wheel Hub Removal.
Fig. 4 Wheel Bearing Assembly Removal.
1.
Remove hub assembly, refer to HUB ASSEMBLY.
2.
Remove hub cap and wheel bearing lock nut.
3.
Drive off wheel hub with a suitable tool. Fig. 3.
4.
Remove circlip with snap ring pliers, then press out wheel bearing assembly from knuckle. Fig. 4.
5.
Drive out wheel bearing inner race, then remove grease seal.
6.
Reverse procedure to install. Torque to specifications.