Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
Rear Bumper Cover / Fascia: Customer Interest
Bumper Fascia - Chrome Molding Separation
Classification:
BT97-006
Reference:
ITB97-015
Date:
February 26, 1997
1997 Q45 FRONT AND REAR BUMPER -
CHROME MOLDING SEPARATES FROM BUMPER FASCIA
APPLIED VEHICLE:
1997 Q45 (FY33)
APPLIED VIN:
Vehicles built before JNKBY31D*VM006064
APPLIED DATE:
Vehicles built before October 29, 1996
SERVICE INFORMATION
If the chrome molding on the front and/or rear bumpers of a 1997 Q45 vehicle separates from the bumper fascia, use this bulletin to replace the chrome
molding.
SERVICE PROCEDURE
1.
Use hot water (approximately 80 C, 176 F) and a plastic tool (e.g.: body filler spreading tool) to remove the molding from the bumper (see Figure
2).