Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
22.
Apply 12 volts DC to the new Inner slide motor (see Figure 15} so it slides to the most forward position.
23.
Connect the Flexible drive cable to the Inner and Outer side assemblies (see Figure 16).
NOTE:
Do not bend or kink the flexible drive cable. A noise will result.
24.
Apply 12 volts DC to the seat slide motor so it moves the Outer slide assembly to the rear most position (see Figure 16).
25.
Disconnect the Flexible drive cable.
26.
Apply 12 volts DC to the seat slide motor so it moves the Inner slide assembly to the rear most position (see Figure 16).