Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
19.
Completely loosen the flexible drive cable nut at the inner slide motor assembly (refer to Figure 12).
NOTE:
Do not bend or kink the flexible drive cable. A noise will result.
20.
Remove the outer nuts, on the front and rear lift link assemblies (refer to Figure 13), from the inner slide motor assembly (note washer locations).
21.
Separate the inner slide assembly from the front and rear lifter/slide assembly. Then remove the plastic piece on the inner slide assembly and
install it onto the new slide (refer to Figure 14).