Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
Lifter / Lash Adjuster: Service and Repair
1. Remove the hydraulic lash adjuster.
2. Place adjuster in container of engine oil.
3. While pressing plunger down as shown in the figure, lightly press check ball with a narrow rod.
4. Air bleeding is accomplished when the plunger is pressed and does not spring back.
CAUTION: Be especially careful not to damage the check ball.
NOTE:
-
If air bleeding does not remove air, replace the hydraulic lash adjuster assembly.
-
Do not disassemble hydraulic lash adjuster.