Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
/Page-488001.png)
Crankshaft Main Bearing: Specifications
Torque Specifications
1
Tighten bolt Nos. 1 - 10 to 36 - 42 Nm (27 - 31 ft. lbs.) and bolts 11 - 20 to 26 - 32 Nm (20 - 24 ft. lbs.). Refer to Service and Repair for bolt
location identification.
3. Using as angle wrench, turn bolt Nos. 1 through 10 to 35 - 45° clockwise and bolt Nos. 11 through 20, 30 - 40° clockwise, as shown in Service
and Repair.
4. Tighten bolt Nos. 21 - 30 to 46 - 52 Nm (34 - 38 ft. lbs.), as shown in Service and Repair.
