Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
1. Remove blower motor unit from the blower case.
2. Remove all foreign material from the case.
3. Re-install the blower motor unit.
4. Run the blower motor at low fan speed (speed 1 or 2) and re-evaluate the noise:
A. If the noise is gone, no further action is needed.
B. If the noise is still a loud rattle, clatter, jolt, or flap, investigate other causes for the noise and repair as needed.
C. If the noise is a light ticking or humming, go to and complete the vehicle specific procedure Install Blower Motor Cover (Pages 2-3 for I30,
QX4, and G20 vehicles; Pages 3-5 for Q45 vehicles).
PARTS INFORMATION
CLAIMS INFORMATION
NOTE: These are the ONLY approved repair procedures for this incident. Claims to Infiniti for the repair of this incident may be denied if the repairs
are not performed exactly as outlined in this bulletin.
Submit a Primary Failed Part (PP) line using claims coding as shown.