Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
cannot detect its malfunctions with the on-board diagnostic system.
SPLICE LOCATIONS
splice Location
^
"GT2", "T4" etc., which are shown in the wiring diagram, refer to wiring harness splice points. These points are located in shaded areas "GT2",
"T4", etc. in illustrations under the title "SPLICE LOCATION".
^
Wiring harness splice points are subject to change without prior notice.
SWITCH POSITIONS
Switches are shown in wiring diagrams as if the vehicle is in the "normal" condition.
A vehicle is in the "normal" condition when:
^
ignition switch is "OFF",
^
doors, hood and trunk lid/back door are closed,
^
pedals are not depressed , and
^
parking brakes is released.