infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Engine - Cranks, But Will Not Start (Hard Starting)|Page 6399 > < Engine - Cranks, But Will Not Start (Hard Starting)|Page 6397
Page 4
background image

If the model or model year you are working on is not listed, refer to the appropriate service manual (EF & EC or EC section in recent service
manuals) section, and perform the "IDLE SPEED/IGNITION TIMING/IDLE MIXTURE RATIO INSPECTION" procedure.

10.

Turn the engine off, and re-connect the TPS.

Procedure B
Perform the following procedure based on the vehicle model being worked on.

Q45

1.

If the base idle speed is within specification and the vehicle has experienced hard starting following a short driving cycle, do the following
depending on model year:

Figure 1

1990-1996: Install the countermeasure starter motor assembly and power steering heat insulator (see Parts Information on page 5). Refer to the
appropriate service manual (EL section) for installing the starter motor. Refer to Figure 1 for installing the power steering heat insulator.

Engine - Cranks, But Will Not Start (Hard Starting)|Page 6399 > < Engine - Cranks, But Will Not Start (Hard Starting)|Page 6397