Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
step 4E below ("Touch the Address number on the...").
E.
Touch the Address number on the CONSULT-II screen (titled "Configure Ethernet"). A numeric keypad will appear (see Figure 4).
NOTE:
The Ethernet (IP) Address for the ASIST PC you are working on will be different from the Address shown in Figure 4.
F.
Use the key pad to set the CONSULT-II Ethernet (IP) Address to match the ASIST PC Address with the exception that the Address number
ends with 176.
G.
Touch "Save" and then press "Copy" to print the Address for future reference.
H.
Turn off CONSULT-II to allow the new Address to be saved in memory.
I.
On the ASIST PC, close the "IP Configuration" window, close the "MS-DOS Prompt" window, then proceed with step 5.
5.
Launch ASIST. From the ASIST PC main menu screen, select "INFO. Tool Box" (see Figure 5).