Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
Clockspring Assembly / Spiral Cable: Service and Repair
Removal
Removal - Air Bag Module And Spiral Cable
CAUTION:
Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3 minutes.
Always work from the side of air bag module.
Removal - Air Bag Module And Spiral Cable
1. Remove lower lid from steering wheel, and disconnect air bag module connector.
Removal - Air Bag Module And Spiral Cable
2. Remove side lid. Using the TAMPER RESISTANT TORX (Size T50), remove left and right special bolts. Air bag module can then be removed.