Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
/Page-2056005.png)
10.
Peel off the remaining, unexposed bottom section of the tape backing (see Figure 8A).
11.
Carefully apply the tape around the remainder of the "D" ring. Take care to apply the tape so that no wrinkles are present. Press down the edges of
the tape (see Figure 8B).
12.
Pull the seat belt back and forth against the tape-covered "D" ring to ensure that the tape is firmly applied (see Figure 9).
13.
Remove the binder clip from the seat belt.
14.
Confirm that the seat belt moves smoothly and quickly through the "D" ring by latching and unlatching it and allowing it to retract back into the
retractor mechanism several times.
15.
Repeat steps 1 through 14 on the remaining front seat belt.
