Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
Clutch: Service and Repair
Forward Clutch Drum Assembly
DISASSEMBLY
1. Remove side plate from forward clutch drum.
2. Remove low one-way clutch from forward clutch drum.
3. Remove snap ring from forward clutch drum.
4. Remove needle bearing from forward clutch drum.
INSPECTION
Forward Clutch Drum
-
Check spline portion for wear or damage.
-
Check frictional surfaces of low one-way clutch and needle bearing for wear or damage.
Needle Bearing And Low One-way Clutch