Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
/Page-1489012.png)
61.
Depress the brake pedal and move the shift lever from "P" to "R" to "N" to "D", making sure the indicator next to the speedometer (see Figure 14)
correctly displays each selected shift lever position.
A.
If the indicator (next to the speedometer) does NOT correctly display each of the selected shift lever positions, go back to step 46 and start
over.
B.
If the indicator (next to the speedometer) correctly displays each of the selected shift lever positions, proceed to step 62.
62.
Move the shift lever back from "D" to "N" to "R" to "P", making sure the indicator next to the speedometer (see Figure 14) correctly displays each
selected shift lever position.
63.
Press:
^
ENGINE
^
SELF DIAG RESULTS
64.
Check the status of any stored ENGINE DTC code(so):
A.
If no DTC(so) is stored or one or more of the following code(so) is stored, proceed with step 65.
^
P0120, P0505, P0605, P1065, P1123, P1212, U1000, or VDC 12
B.
If a DTC(so) other than the codes listed above is stored:
^
Print out the stored DTC(so)
^
Print out the freeze frame data
^
Proceed with diagnosis according to the applicable Service Manual
65.
Press:
^
ERASE
^
YES
^
BACK (2x)
^
VOC
^
SELF DIAG RESULTS
66.
Check the status of any stored VDC DTC code(so):
A.
If no DTC(so) is stored or one or more of the following code(so) is stored, proceed with step 67.
^
P0120, P0505, P0605, P1123, P1212, U1000, or VDC 12
B.
If a DTC(so) other than the codes listed above is stored:
^
Print out the stored DTC(so)
^
Print out the freeze frame data
^
Proceed with diagnosis according to the applicable Service Manual
67.
Press:
^
Erase
^
Yes
68.
Turn the ignition key to the OFF position, and disconnect CONSULT-II.
