Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
1.
Remove the door finisher assembly.
2.
Remove the sealing screen and the door speaker (if equipped).
3.
Operate the power window main switch to raise/lower the door glass until the glass mounting nuts can be seen.
4.
Remove the glass mounting nuts.
5.
Raise up the door glass and hold with a suction lifter.
6.
Remove the mounting bolts, and remove the regulator assembly.
7.
Disassemble the power window motor from the regulator.
TYPE-D: DOOR SASHLESS + MODULE TYPE (FR)
1.
Remove the door finisher assembly.