QX4 V6-3.5L (VQ35DE) (2001)
Seals and Gaskets: Service and Repair
Pinion Seal
R200A
FRONT OIL SEAL REPLACEMENT
1. Remove front propeller shaft.
2. Loosen drive pinion nut.
Tool number: KV38108300 (J44195)
3. Remove companion flange.
4. Remove front oil seal.
5. Apply multipurpose grease to cavity at sealing lips of oil seal.
Press front oil seal into carrier.
6. Install companion flange and drive pinion nut.
7. Install propeller shaft.
Tool number: KV38100500 (J25273)
H233B
FRONT OIL SEAL REPLACEMENT
1. Remove propeller shaft.