QX4 V6-3275cc 3.3L SOHC MFI (VG33E) (1998)
NOTE:
The ECM and AAC Valve MUST be installed as a set. The new ECM is labeled: "Installed per ITB98-047". It is accompanied with a label to be
secured to the new AAC valve.
2.
After installation of the ECM, locate the label found in the ECM box.
3.
Before installation of the AAC valve, secure the label found in the ECM box to the AAC valve as shown in Figure 5.
4.
Install the new AAC valve.
5.
Recheck the base idle as outlined in steps 1 through 11.
NOTE:
It is not necessary to recheck the ignition timing in step 6.
6.
Use CONSULT to clear any DTCs. Road test the vehicle to ensure no other driveability issues are present.
PARTS INFORMATION
IMPORTANT:
If either the AAC valve or the ECM need replacement in the future, you must use the parts information from this bulletin.
CLAIMS INFORMATION