QX4 V6-3275cc 3.3L SOHC MFI (VG33E) (1998)
/Page-51001.png)
Power Transistor: Testing and Inspection
Related Diagnostic Procedures
DTC 0201 Ignition Signal
Component Description
IGNITION COIL & POWER TRANSISTOR
The ignition signal from the ECM is sent to the power transistor. The power transistor switches on and off the ignition coil primary circuit. As the
primary circuit is turned on and off, the proper high voltage is induced in the coil secondary circuit.
Consult Reference Value In Data Monitor Mode
Specification data are reference values.
