infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

ABOUT US
Revolution Sensor <--> [Transmission Speed Sensor, A/T] > < Diagram Information and Instructions|Page 9749

QX4 V6-3275cc 3.3L SOHC MFI (VG33E) (1998)

Page 1
background image

Transmission Position Switch/Sensor: Adjustments

1. Remove manual control linkage from manual shaft of A/To assembly.
2. Set manual shaft of A/To assembly in "N" position.
3. Loosen inhibitor switch fixing bolts.
4. Insert pin into adjustment holes in both inhibitor switch and manual shaft of A/T assembly as near vertical as possible.
5. Reinstall any part removed.
6. Check continuity of inhibitor switch.

Revolution Sensor <--> [Transmission Speed Sensor, A/T] > < Diagram Information and Instructions|Page 9749