QX4 2WD V6-3.5L (VQ35DE) (2003)
5.
After the rotors have been resurfaced:
^
Recheck the rotor thickness. Specification: 26.0 mm (1.024 in.) minimum thickness.
^
Check the rotor runout. Specification: 0.03 mm (0.001 in) maximum runout.
NOTE:
Runout specification is new and is slightly less than what is shown in the ESM.
6.
Reinstall the brake caliper assemblies.
^
Refer to the ESM for brake caliper installation instructions.
Install new front pads and hardware kit