QX4 2WD V6-3.5L (VQ35DE) (2003)
/Page-518009.png)
^
Avoid impact on the intake camshaft sprocket.
^
Do not disassemble the intake camshaft sprocket.
38. Remove rear timing chain case as follows, if necessary.
a. Loosen mounting bolts in numerical order shown in figure, and remove them.
b. Disconnect liquid gasket applied portion using seal cutter (special service tool: KV10111100) or an equivalent tool. Then remove rear timing
chain case.
CAUTION:
^
Do not remove plate metal cover of oil passage.
^
After removing chain case, do not apply any load which affects flatness.
39. Remove O-rings from cylinder head.
