QX4 2WD V6-3.5L (VQ35DE) (2003)
40. Remove O-rings from cylinder block.
41. Remove RH and LH camshaft chain tensioners from cylinder head as follows if necessary.
a. Remove No. 1 camshaft brackets.
b. Remove chain tensioners with stopper pin attached.
42. Use a scraper to remove all traces of liquid gasket from front and rear timing chain case, and opposite mating surfaces.
^
Remove old liquid gasket from the bolt hole and thread.
43. Use a scraper to remove all traces of liquid gasket from intake valve timing control cover, water pump cover and chain tensioner covers.
44. Remove front oil seal from front timing chain case.
45. Remove water pump cover and chain tensioner cover from front timing chain case if necessary.
Inspection