infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 10694 > < Diagram Information and Instructions|Page 10692
Page 1
background image

Compass: Description and Operation

System Description
Compass and Temperature

This unit displays following items: 

*

Earth magnetism and heading direction of vehicle. 

*

Outside air temperature. 

*

Caution for frozen road surfaces. 

DIRECTION DISPLAY

Push the switch when the ignition key is in the "ACC" or "ON" position. The direction will be displayed.

OUTSIDE TEMPERATURE DISPLAY

Push the switch when the ignition key is in the "ACC" or "ON" position. The outside temperature will be displayed in °F. 

*

Selecting the indication range 
Push the switch to change from "°F" to "°C". 

*

When the outside temperature drops below freezing point, ICE is displayed on the unit. 

*

When the outside temperature is between 55°C (130°F) and 70 °C (158 °F), the display shows 55 °C (130 °F)

*

When the outside temperature is lower than -30 °C (-20 °F) or higher than 70 °C (158 °F), the display shows only "---" though it is operating. This
is not a problem. 

*

The indicated temperature on the thermometer is not readily affected by engine heat. It changes only when one of the following conditions is
present. 
a. The temperature detected by the ambient air temperature sensor is lower than the indicated temperature on the thermometer. 
b. The difference in temperature detected during a period of 40 seconds is less than 1 °C (1.8 °F) when vehicle speed has been greater than 24

km/h (15 MPH) for more than 100 seconds. (This is to prevent the indicated temperature from being affected by engine heat or cooling fan
operation during low-speed driving.) 

c. The ignition key has been turned to the "OFF" position for more than 4 hours. (The engine is cold.)

Diagram Information and Instructions|Page 10694 > < Diagram Information and Instructions|Page 10692