QX4 2WD V6-3.5L (VQ35DE) (2003)
Oil Filter: Service and Repair
Changing Oil Filter
1. Remove oil filter with Tool.
WARNING: Be careful not to burn yourself, as the engine and engine oil are hot. The filter is a full-flow cartridge type and is provided
with a relief valve.
2. Clean oil filter mounting surface on cylinder block. Coat rubber seal of new oil filter with engine oil.
3. Screw in the oil filter until a slight resistance is felt, then tighten an additional 2/3 turn.
4. Add engine oil.
^
Clean excess oil from engine.