QX4 2WD V6-3.5L (VQ35DE) (2003)
8. Press "ENTER", then test output code is displayed. Record the test output code on the repair order.
9. Toggle back to the "DIAGNOSTIC SCREEN" for test results.
NOTE: If necessary, the tester will ask the user to determine if the battery has just been charged. Choose the appropriate selection by pressing the up
or down arrow button and then press the "ENTER" button to make the selection.
When testing a battery installed in a vehicle that has recently been driven, select "BEFORE CHANGE".
If the battery has just been slow charged due to a "CHARGE & RETEST" decision by the tester, and the tester asks the user "BEFORE
CHARGE/AFTER CHARGE", select "AFTER CHARGE".