infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8445 > < Initial Inspection and Diagnostic Overview|Page 8443
Page 1
background image

Battery: Component Tests and General Diagnostics

Checking Electrolyte Level

WARNING: Do not allow battery fluid to come in contact with skin, eyes, fabrics, or painted surfaces. After touching a battery, do not touch or

rub your eyes until you have thoroughly washed your hands. If acid contacts eyes, skin or clothing, immediately flush with water
for 15 minutes and seek medical attention.

Checking Electrolyte Level

Remove the cell plug using a suitable tool.

Add distilled water up to the MAX level.

Sulphation

A battery will be completely discharged if it is left unattended for a long time and the specific gravity will become less than 1.100. This may result in
sulphation on the cell plates. 

To determine if a battery has been "sulphated", note its voltage and current when charging it. As shown in the figure, less current and higher voltage are
observed in the initial stage of charging sulphated batteries.

A sulphated battery may sometimes be brought back into service by means of a long, slow charge, 12 hours or more, followed by a battery capacity test.

Initial Inspection and Diagnostic Overview|Page 8445 > < Initial Inspection and Diagnostic Overview|Page 8443